System Five Co., Ltd. japanese
Accelerometer
Wireless 2 Axis Accelerometer
WTM-500 Characteristic
  • Suited for a low frequency vibration measurement of the structural health
  • monitoring.
  • Two axis acceleration measurement of X,Y is possible .
  • Transmission range : 250 m.
  • Number of slave : Max 7.
  • Accuracy of AD conversion : 16 bit.
catalogue:PDF manual:PDF

image image

WTM-500 Specification of Master
No ITEM SPECIFICATION
1 Certification -
2 Specification of Wireless Lan IEEE 802.15.4
3 Protocol Original
4 Transmission Output 5dbm Max
5 Wireless Lan Channel 16ch 2405MHz 5MHz Step
6 Antenna External Antenna
7 Transmission Range 250m (Open Area)
8 Power Supply 5V (From USB)
9 Interface USB (Mini B)
10 Outer Dimension 58 18 95mm
11 Operating Temperature -20 50

WTM-500 Design Diagram
image


WTM-500 Specification of Slave
No ITEM SPECIFICATION
1 Accelation Sensor ADL 203 2
2 Sensor Input 2ch 0 2V
3 Sampling Frequency 100Hz / 1ch
4 AD Accuracy 16bit
5 Transmission Rate 100Hz 2ch 16Bit 30s (Interval 30s)
6 Certification -
7 Specification of Wireless Lan IEEE 802.15.4
8 Protocol Original
9 Transmission Output 5dbm Max
10 Wireless Lan Channel 16ch 2405MHz 5MHz Step
11 Antenna External Antenna
12 Transmission Range 250m (Open Area)
13 Power Supply 12VDC (External Supply)
14 Power Output for Sensor 5V1% 20mA
15 Consumption Current Max 40mA at 12V
16 Outer Dimension 100 100 60 mm
17 Operating Temperature -20 50